For this kit please measure the height and width as per the diagrams below. These measurements relate to the “open space” i.e. the space created once the window is open.
As long as the width and height of your window opening are within the measurements specified for a kit, that kit will be the correct kit for you e.g. if the width of your window opening is 680mm and the height is 360mm then the smallest kit (760mm x 380mm) is the kit you require.
Please note these width and height sizes are interchangeable.
Things to consider when measuring:
The screen frame is 19mm wide and is designed to be placed directly onto your window frame.The lift on/off hinge and turn button fixings sit to the side of the screen and will require additional space - 15mm for the hinge and 10mm for the turn button. So, for example, on one side of your window frame you would require 19mm for the frame + 15mm for the hinge (a total of 34mm) and on the other 19mm for the frame + 10mm for the turn button (a total of 29mm). If you are limited for space the size of the screen can be reduced by as much as 10mm.
The magnetic fixing is narrower than the width of the screen frame so no additional space is required with this fixing.
If you are not sure what you require and would like some additional
help this module will guide you through the process by asking some
simple questions.
Our team will review the information provided and email you a quote. This
advice is specifically aimed at your own requirement, so you can be
sure that the suggested products will fit. The module is
self-explanatory; however, should you require more information or
support you can always contact us by phone or email.
Print this page
Which mesh do I need ?
We offer two types of
mesh with this screen. Your choice will depend on which insects you
wish to keep out and the type of use. Both meshes are fully compliant
with food safety regulations.
Standard insect mesh - 18 x 16 holes per square inch
Examples of insects this mesh will keep out: Bees
& Wasps, Bluebottles, Cluster Flies, Crane Flies, Daddy-Long-Legs,
House Flies, Hornets, Ladybirds, Mosquitoes, Moths, Butterflies and
Spiders. Standard insect mesh is designed and manufactured
to ensure maximum visibility (through the screen) ensuring as much light
passes into the room as possible.
We recommend this mesh
for all areas of the UK except in parts of Scotland where Midges are
present and other parts of the UK where Corn Flies and Thunder
Bugs/Thrips are present.
Midge mesh - 30 x 20 holes per square inch
This mesh will keep out: The same as Standard insect mesh + Midges, Corn Flies and Thunder Bugs/Thrips
Midge
mesh has a tighter weave than Standard insect mesh to ensure Midges,
Corn Flies and Thunder Bugs/Thrips cannot penetrate, however the
visibility and airflow is reduced slightly.
We recommend this mesh in parts of Scotland where Midges are present and other parts of the UK where Corn Flies and Thunder Bugs/Thrips are present. Please note - genuine Midge mesh is 30 x 20 - anything less e.g. 20 x 20 or 18 x 16 will not keep midges out.
Stainless steel insect mesh - 18 x 14 holes per square inch
Examples of insects this mesh will keep out:
Bees & Wasps, Bluebottles, Cluster Flies, Crane Flies, Daddy-Long-Legs, House Flies, Hornets, Ladybirds, Mosquitoes, Moths, Butterflies and Spiders.
Stainless steel insect mesh is highly durable and long lasting which makes it ideal for demanding commercial environments. This mesh is fully compliant with food safety regulations.
We recommend this mesh for screens in commercial kitchens, where regular screen cleaning is required and routine use may result in damage to a standard mesh.
Fixings
The width of the screen frame that sits against your window frame is 19mm for the light duty frame and 30mm for the standard frame. It's not essential for the screen frame to fully overlap your window frame, but you should note that the hinge fixings and turn buttons sit to the side of the screen, so an allowance needs to be made for them. Please see dimensions below.
Lift on/off hinges with turn buttons
This fixing consists of a 2 part hinge, one part fixes to the edge of the screen and the other to your window frame. Both are screwed in position. The two hinge parts are connected with a pin which allows you to lift the screen off the hinge for cleaning or storage. The screen is held closed with turn buttons as shown in the second image below. The button is turned through 90 degrees to lock/release the screen.
A handle is provided to assist with opening and closing the screen.
You will require 13mm of flat window frame space next to your screen to fit the hinges on one side and 8mm to fit the turn buttons on the other side. You will also require a 10mm allowance so that you can lift your screen off the hinges.
Magnetic strips
No drilling or screwing is required for this magnetic option. It consists of two, 13mm wide, self-adhesive magnetic strips, one adheres to your window frame, the other adheres to the back of the screen. As the strips are positioned within the width of the screen frame you don't need to make an allowance for this fitting.
Turn Buttons
The screen is held closed
with 'turn buttons' screwed into your framework to the side of the screen. The
button turns through 90 degrees to lock/release the screen.
You will require 8mm of flat frame space next to each side of your screen to fit the turn buttons.
Print this page
,,,,
Share this product:
Delivery & Despatch
FREE DELIVERY to all mainland UK destinations including highlands
Shipped within 7 working days. Please call if your requirement is more urgent.
Shipped by courier
For UK Islands,
Channel Islands, Isle of Man
and Northern Ireland a charge will be added to your basket
For all other destinations please contact us for a shipping quote
Description
DIY kit to make a great value window fly screen. Ideal for keeping out flies, wasps, bees, mosquitoes, spiders and other unwanted insects. These screens comply with Food Safety General Hygiene Regulations 1995. Kit price includes free delivery to all mainland UK locations* Key features:
Choice of 5 kit sizes
Supplied with 18 x 16 industry standard insect mesh.
Strong slim aluminium powder coated frame with push fit corners
Frame is available in White, Brown or Anthracite Grey
Fixings included; choose from magnetic, hinged or turn buttons
Streme offer a wide range of window and door screens
to suit Homes and Businesses. Our range includes Fly Screens, Pet Screens, Pollen Screens,
Pollution Screens and Sun Control products.
Screens are available as DIY Kits or Made to Measure and we offer a fitting service as well. We also stock every kind of
insect mesh including Fibreglass, Aluminium and Stainless Steel and a
selection of specialist mesh products including Pollen, Pollution, Sun Control
& Stainless-Steel mesh.
Registered office: PAW Consulting Ltd, Unit 4, City Limits, Danehill, Reading, Berkshire, RG6 4UP. Company Registration No: 6123349; VAT No: 904499407. Federation of Small Businesses membership No: 2133273.