Roller screens are made to the dimensions provided and shipped with fixings ready to install.
Print this page
This screen can be fitted in 2 ways. For each method of fixing we will show you:
How to measure
tw0 cassettes (each 51mm wide) are fitted into the top of the reveal and the floor using two
tabs and screws,
The two guides (both 40mm high) are screwed into to the underside of the reveal and the floor. For low thresholds, a 22mm bottom guide is available. as an option.We advise taking 3 measurements for both width (top, middle & bottom) and height (left, middle & right) to allow for any variations. In each case use the smallest measurements for your final width and height. We will make your screen to these sizes.
How to measure
two cassettes are fitted to the side door frames using brackets fitted to the side of the cassette. The
total width of the cassette + brackets is 66mm.
The top and bottom guides (both 40mm high) slot into the ends of the cassettes and are fitted to the upper and lower door frames.. For low thresholds, a 22mm bottom guide is available. as an option.
We will make your screen with the maximum outer dimensions to be the measurements provided..
The pricing depends on the size of the screen, and is shown at the top of the page once the width and height have been entered.
Your screen will be supplied, so that when fitted, the overall screen size will match the dimensions entered in the boxes below.
PLEASE ENSURE THE DIMENSIONS ARE ENTERED IN MILLIMETRES (mm); see help on How to Measure if required.
For larger screens please call us.
Streme offer a wide range of window and door screens to suit Homes and Businesses. Our range includes Fly Screens, Pet Screens, Pollen Screens, Pollution Screens and Sun Control products. Screens are available as DIY Kits or Made to Measure and we offer a fitting service as well. We also stock every kind of insect mesh including Fibreglass, Aluminium and Stainless Steel and a selection of specialist mesh products including Pollen, Pollution, Sun Control & Stainless-Steel mesh.
Registered office: PAW Consulting Ltd, Unit 4, City Limits, Danehill, Reading, Berkshire, RG6 4UP. Company Registration No: 6123349; VAT No: 904499407. Federation of Small Businesses membership No: 2133273.
Website created by hush.digital